Archive for February, 2010

High Limb CS-24 Chain Saw For Homeowners 24-inch Chain

I have several of these, in both the 24 inch and 48 inch versions, as I have many limbs to cut of varying sizes and widths. I have read reviews on here with various complaints about the throw bag, the binding of the saw, the limitations of size branch for cutting…..and many more complaints. If one wants to complain about these things, they are probably better off spending several thousand dollars for a tree service. However, if one has the time and the inclination to put in some blood, sweat, and tears, then this is the device for you.

Using this device properly is more of an art than a science admittedly, though it definitely is a combination of both and needs much practice to get right……and even then, it will never be perfect. This cannot be emphasized enough. Two people usually work better than one because of the angles. This device will not last forever!……you will probably need new rope once the original rope wears out if you do a lot of cutting. Oil the chain, especially after getting wet. And getting the chain oriented properly with the righting weight takes practice…..and angle is important once you do start to cut. Some cuts go very fast; others will bind and get caught and take an hour or more, even with similar branches and angles. Even if there was a class on how to use this, I believe these issues would remain as there are so many factors which go into a good cut. Dead trees usually cut through quickly, though I have gotten caught on these too. If the angle is even slightly off, it will bind. (and on large diameter branches, do not even think of using the small 24 inch version of this) The weakest part of this device is the clip for the throw bag…..that will break after a few uses. But this is easily replaced.

And when cutting, it goes without saying to be away from the branch being cut. This is one of the best characteristics of this device……it is probably the only method of cutting trees which can keep you safe and far away from falling branches. (This alone is worth 5 stars!)

All of this being said, anyone with a lot of trees would be well served to have at least one of these on hand…..unless they like writing checks to tree service companies.

Special offer at Amazon Check Price Now!

Overview

Lets you cut branches up to 10in. in diameter while you stay on the ground. No tree service bills… no wobbly ladders! Just toss the safety weight over the limb you want to cut, then pull alternately on the two 25-ft. polypropylene ropes. Carbon steel blades can be sharpened. U.S.A. Application: Rope, Chain Length (in.): 24, Cutting Thickness (in.): 10, Rope Length (ft.): 25

Feature

• Cut high limbs safely and easily from the ground.
• Cut limbs 25-feet, or add more rope for higher cuts.
• Pays for itself in the first few uses.
• Trim your neighbor’s overhanging branches
• Provide sunny areas to shaded gardens

Customer Reviews

Great Limbing Saw for High Branches – P. Terkow – Maine, USA
I love this saw, what a great idea! This saw easily gets those really high branches beyond the reach of pole saws, and ladders. It consists of two long pieces of rope with a chain saw blade tied in the middle. A weighted bean bag allows you to toss the line over the limb. Once you get it going, I was amazed at how quickly it cuts. The limb height is limited by the length of the lines, but you can always add more if needed. The challenge is throwing the bean bag over the right limb and getting the chain to lay right side up. I have thought about tying a steel nut to some fishing line and shooting it up with a sling shot for greater height and accuracy. I own a chain saw, skill saw, table saws, chop saw, band saw, coping saw, hack saw and others, every one has a special use. “High Limb” is an apt name for this one. High limbs often require bucket trucks and crew, but this little saw could possibly save you from that expense.

Works well, but there’s a trick to it – Euphemism – ~38N,78W
This worked great for taking down the mid-level branches on the trees in my backyard, ranging from 12-16 strokes to knock down a 3-inch tulip poplar branch. The trick is getting the chain to align properly over the branch, since the chain only cuts when the teeth are pointed toward the wood. There’s a little tab that’s supposed to flip the chain in the proper direction, but it requires a bit of finesse to make it work, and the learning curve at the outset is not particularly gentle–you need decent vision and some patience. Once I got the hang of it, I could get the chain oriented properly within 60-90 seconds.

rope saw – Robert J. Pintabona –
Quality product. Did the job. Arrived quickly. Go for the four foot chain not the two foot. Trust me.

Special offer at Amazon Check Price Now!

Note. Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants.

See Also : Cordless Tools Reviews